Publicidad
Idiomas disponibles
Idiomas disponibles
4.2.- Getting the legs out of its support for transport (S) and inserting them in its lodges of
work (V) verifying that they are left in depth and fasten for the retaining security triggers
(R). It must dispose long paws on the front part and the short paws on the rear end.
SEE FIGURE 1.
4.3.- Adjust the vertical position of the tower by means of the support plates (Q) turning
the handle (H) in the required sense in order to achieve that the bubble of the level (F)
become centered in the circle. It is necessary when leveling that the transporting
wheels will have to keep in contact with the ground as another supporting point
SEE FIGURE 2.
4.4.-Extract the loading forks (U) removing safety bolts (L), and place them in position to
support the load. Place the safety bolts.
SEE FIGURE 3.
The position of the loading forks (U) in position to charge must be such that the
indication be left in the topside and itself has a slope as is shown up in the following
figure.
SEE FIGURE 4.
4.5.- Place the load to lift on the forks of the tower by means of a suitable support, so
that the load only aperate in vertical sense. The load will have to be as minimal of 25
Kg. and it will never have to be more displaced of 25 cm from the rear end of the
loading forks.
SEE FIGURE 5.
4.6.- Elevation:
Remove the brake (O) and lift the tower turning the winch's handle in clockwise (N
),
1
raising the load to the required height.
SEE FIGURE 6.
4.7.- Holaing on:
Release the winch's handle (W), which will remain fixed by the winch's automatic
brake.
SEE FIGURE 7.
The tower can be left in any intermediate needed position just releasing the handle.
It is recommended linking the winch's handle with a chain to avoid the manipulation
by not authorized people.
4.8.- Descending:
The load descending is obtained by the opposite way. Turn the winch's handle (W) in
counterclockwise (N
), Lowering the load lifting down the different profiles until the
2
tower become completely folded to its minimal height
SEE FIGURE 8.
The tower can be left in any intermediate needed position as in lifting.
Publicidad
