Midland 445 BT Manual Del Usuario página 7

Trouble Shooting:
Bluetooth Connection interrupted or not possible
It may be a matter of some exercise to perform the pairing of both units at the same time gap. If you should not succeed at the
first trial, just try it once more!
Important is to start always with switched off Bluetooth functions, otherwise you will not reach the pairing mode.
As long as two Bluetooth devices are paired, they should find each other automatically after any off and on switching.
If the communication link is interrupted or not possible, please try first to switch both units off, wait some seconds and then
switch on again. Press the talk / Bluetooth button(s) and check whether or not the link is re-established. If this procedure does
not help, please repeat the pairing procedure. However, it can happen that 2 devices may loose their pairing, maybe through
EMC or radio interference effects.
Service Address (for radios sold in Germany)
© Alan Electronics GmbH 2006 - Daimlerstr. 1 k -
Service Download:
Repairing inquiries:
Fax:
e-mail:
In other countries please contact your distributor or have a look to our international homepage
http.//www.alangroup.eu
There You will find the addresses of our European distributor's network.
D 63301 Dreieich – www.alan-electronics.de
http://www.hobbyradio.de
(+49) 6103 9481 22
(+49) 6103 9481 60
service@alan-electronics.de