Cm2 Hardware Reference; Cm2 Interface Board Hardware Information; Dry Contact Closures - CHIEF CM2C40 Instrucciones De Instalación

CM2C40
1st Position of switch array
1st Position of connector array
CM2C40 Interface Board Hardware Information
(See figure 30)

Dry Contact Closures

The unit provides dry contact outputs for system feedback, or to control other devices.
To complete circuits to external devices:
1. Connect the common wire from your switch to terminal 7. (See figure 31)
2. Connect the 'up' wire from your switch to terminal 5.
3. Connect the 'down' wire from your switch to terminal 6.
20
1st Position of connector array
Figure 30
Figure 31
Installation Instructions