NSK iCare Manual De Instrucciones página 7

5-2 Filling with Maintenance Oil
• Before filling with Maintenance Oil, be sure that the Drain Screw on the
underside of the Unit is tightened securely. Oil may leak if the screw is loose
CAUTION
(Fig. 3).
1) Open the Cover (Fig. 4).
2) Remove the Oil Fill Cap by turning it counter clockwise (Fig. 5).
3) Remove the cap for Maintenance Oil and install the Oil Filling Nozzle (Fig. 6).
4) Fill with Maintenance Oil slowly (Fig. 7).
5) When filling is complete, securely attach the Oil Fill Cap by turning it clockwise.
• Do not fill Maintenance Oil in a room where there is a risk of explosion or fire.
DANGER
• Do not overfill Maintenance Oil in order to avoid accidental oil leaks. Pour slowly.
• Use only the NSK Maintenance Oil for iCare. Use of oil other than NSK Maintenance Oil for iCare may cause a failure and result
CAUTION
in insufficient product lubrication.
E0643E002 (CS5) iCare-EN_141001.indd 6
Cover
Oil Filling Nozzle
Maintenance Oil
6
Drain Screw
Oil Fill Cap
Fig. 4
Oil Filling Hole
Oil Filter
Fig. 6
Fig. 3
Fig. 5
Fig. 7
2014/10/01 10:41:30