Control Panel; Function Buttons; Size Of The Touch Screen; Division Of The Touch Screen - Hilti POS 15 Manual De Instrucciones

1. Pivot the tool carefully by hand to the left and right and tilt the telescope up and down to check operation of the
friction clutches.
2. Turn the horizontal and vertical drives carefully in both directions.
3. Turn the focussing ring fully to the left. Look through the telescope and turn the eyepiece ring to bring the cross
hairs into focus.
4. With a little practice you can check the two optical sights on the telescope to ensure that they are in alignment
with the object targeted by the cross hairs.
5. Check to ensure that the cover for the USB interfaces is closed securely before further use of the tool.
6. Check that the screws on the carrying handle are tight.

5.5 Control panel

The control panel consists of a total of 5 buttons with symbols plus a touch screen for interactive operation.

5.5.1 Function buttons

The function buttons are used for general operation of the tool.

5.5.2 Size of the touch screen

The touch screen is approx. 74 x 56 mm (2.9 x 2.2 in) in size and has a resolution of 320 x 240 pixels.

5.5.3 Division of the touch screen

The touch screen is divided into areas for operation of the tool and for displaying information to the user.
Switch the tool on or off.
Switch the display backlight on
or off.
Select the FNC menu for addi-
tional settings.
Cancel or end all active
functions and return to the start
menu.
Show the help text for the cur-
rent screen.
en
19