9. Fill pool until the underwater light is
completely submerged in water before
operating the light for more than 10 seconds.
Turn on main switch or circuit breaker, as
well as the switch which operates the
underwater light itself, to check for proper
operation.
SECTION IV.
Amerlite Replacement Parts
5
6
Rev. L • Rev. L • Rév. L 10-20-14
Item
1
No.
2
1
1
1
2
3
2
3
4
5
5
6
4
7
7
7
7
7
7
Figure 3.
Figure 4.
Bolt and nut are to be tightened at approx. 45 degrees
from the pilot screw between the tabs on the face ring
as shown above.
Part
Description
No.
79212100
Face ring, large plastic, for S/S only, white
79212165
Face ring, large plastic, for S/S only, gray
79212111
Face ring, large plastic, for S/S only, black
79104800
Pilot Screw, with captive gum washer, brass
619355
Pilot Screw, with captive gum washer, S/S
79110600
Face ring assembly, S/S
79111000
Uni-tension wire clamp assy.
79100100
Lens, clear, 8-3/8 in. dia., tempered
79100200
Lens, med. blue, 8-3/8 in. dia., heat resistant
79101600
Gasket, 8-3/8 in. lens
79101800
Floodlamp, med. base, 100 watt, 12 volt
79101900
Floodlamp, med. base, 300 watt, 12 volt
79102100
Floodlamp, med. base, 500 watt, 120 volt
79107600
Floodlamp, med. base, 300 watt, 120 volt
79102200
Floodlamp, med. base, 400 watt, 120 volt
78900700
Kwik-change lens cover, green
78900800
Kwik-change lens cover, blue
78900900
Kwik-change lens cover, red
7
A
45 degrees
P/N • Núm/Pte. • Réf. 99360000