Southland SELS60 Manual Del Operador página 5

Important Safety Information
• Save all instructions
Grounding Instructions:
This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug
must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and
Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a
ordinances.
qualified electrician. Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the
equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not
connect the equipment-grounding conductor to a live terminal. Check with a qualified electrician or service
personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is
properly grounded. Repair or replace a damaged or worn cord immediately.
Operation:
1. Do NOT put hands near moving parts. Contact with the splitting wedge can amputate fingers and hands.
2. Never allow bystanders within 10 feet of the machine while running. Keep children and pets away.
3. Never operate the machine without proper guards, plates or other safety protective devices in place.
4. Keep your hand away from splits that occur during the splitting operation. These may close suddenly and
crush or amputate fingers and hands. Do not remove jammed logs with your hands.
5. Exercise caution to avoid slipping or falling. Maintain a work space clean of wood and debris.
6. Stop motor and disconnect from electric power source when leaving the operating position, and when
making any repairs, adjustments and inspections.
7. Take all possible precautions as recommended by the manufacturer when leaving the machine unattended.
Stop the engine, do not leave the unit unattended until all moving parts have come to a complete stop.
8. Do not overload the machine by attempting to split any material beyond manufacturer's recommendation.
9. Use only attachments and accessories approved by the manufacturer of the machine.
10. Never operate the machine without good visibility or light. Do not operate at night.
11. Do not operate the machine while under the influence of alcohol or any drugs that can affect your ability to
safely operate the splitter.
Questions? Call Toll Free at 1-800-737-2112
(Continued)
EN - 5
Copyright © 2018 MAT Engine Technologies, LLC