Safety - ESAB Origo Arc 250 edw Manual Do Usuário

1

SAFETY

Users of ESAB welding equipment have the ultimate reponsability for ensuring that
anyone who works on or near the equipament observes all the relevant safety
precautions. Safety precations must meet the requirements that apply to this type of
welding equipment. The following recommendations should be observed in addition to
the standard regulations that apply to the work place.
All work must be carried out by trained personnel well- acquainted with of the operation
of the welding equipment. Incorrect operation of the equipment may lead to hazardous
situations which can result in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
l
its operation
l
location of emergency stops
l
its function
l
relevant safety precautions
l
welding
2. The operator must ensure that:
l
no unauthorized person is stationed within the working area of the equipment
when it is started up.
l
no-one is unprotected when the arc is struck
3. The work place must:
l
be suitable for the purpose
l
be free from drafts
4. Personal safety equipment
l
Always wear recommended personal safety equipment, such as a safety
glasses, frame-prooft clothing, safety gloves.
l
Do not wear loose-fitting itens, such as scarves, bracelets, rings, etc., which
could become trapped or cause burns.
5. General precautions
l
Make sure the return cable is connected securely.
l
Work on high voltage equipment may only be carried out by a qualified
electrician.
l
Appropriate fire extinquishing equipment must be clearly marked and close at
hand.
- 23 -