Operation Procedure - NSK ULTIMATE XL-K Manual De Operaciones

4. Mounting of the Foot Pedal
Insert the foot pedal plug into the
5. Mounting of the Air Turbine
Insert the plug of the Turbine Adapter into the
3
Turbine Adapter Connector at the back of the
unit. Insert two hoses from the
into the openings for foot pedal connection in the air
line kit. (Fig. 5)
IN
Foot Pedal Connector

3. Operation Procedure

1. Connect the power code to outlet.
2. Make sure that the
turning counterclockwise)
12
3. Turn the Power Switch. The preset rotation speed will appear on the Indicator.
4. Select the rotation direction with
is pressed, the direction changes between FORWARD and REVERSE.
5. Preset the maximum rotation speed with the
6. Depress the 5 Knee Controller for ULTIMATE XL-K and the
and the motor will run. The rotation speed can be variably controlled within the preset
maximum rotation speed range according to the degree of depression of the
Controller or the
Auto cruise mechanism
To fix the speed within the rotation speed range set by the volume with the
Knob, press the
10
next to the switch, will light up. If the desired speed is set with the
6 Pedal and a uniform speed can be maintained for one second, the motor will continue
running at the desired speed if the
it, depress the 5
again.
(ULTIMATE XL-D)
17 Foot Pedal Connector at the back of the unit.
(Option)
3
Turbine Adapter
Foot Pedal
Connector
OUT
Fig.6
Speed Control Knob is at the lowest position (position reached by fully
7
9
Forward/Reverse Selector Switch. Each time this switch
6
Pedal.
Auto Cruise Switch while the motor is at rest. The display lamp, which is
Knee Controller or the
5
Knee Controller or the
Turbine Adaptre
Connector
Speed Control Knob.
7
6
6
6 Pedal again or press
7
IN
To XL-K/D
OUT OUT OUT
AIR IN
Pedal for ULTIMATE XL-D,
5
Knee
7 Speed Control
5 Knee Controller or the
Pedal is released. To cancel
Auto Cruise Switch
10
Fig.5