Technical Data - Harman AKG C214 Modo De Empleo

TEcHNIcAL dATA

6 Technical data
Type:
Polar pattern:
Open‑circuit sensitivity:
Frequency range:
Impedance:
Recommended load impedance:
Bass cut filter slope:
Preattenuation Pad:
Equivalent noise level to IEC 60268‑4 (A‑weighted):
Signal/noise ratio re 1 Pa (A‑weighted):
Max. SPL for 0.5% THD:
Dynamic range (A‑weighted):
Environment:
Powering:
Current consumption:
Connector:
Dimensions:
Net weight:
This product conforms to the standards listed in the Declaration of Conformity. You can request the Declaration of
Conformity by e‑mail from sales@akg.com.
42
1‑inch large diaphragm backplate pressure gradient microphone
cardioid
20 mV/Pa (‑34 dBV)
20 to 20,000 Hz (see frequency response graphs)
≤ 200 ohms
≥1000 ohms
6 dB/octave at 160 Hz
0/‑20 dB (switchable)
13 dB(A) (0 dB preattenuation)
81 dB
136/156 dB SPL (0/‑20 dB)
123/143 dB (0/‑20 dB)
temperature: ‑10 °C to +60 °C
R. H.: 95% (+20 °C), 85% (+60 °C)
12 to 52 V phantom power to IEC 61938
< 2 mA
IEC standard 3‑pin XLR
54 x 43 x 160 mm /
2.1 x 1.7 x 6.3 in.
290 g / 10.2 oz.
C214 MANUAL
Frequency Response C214
Polar Diagram C214
C214 MANUAL
TEcHNIcAL dATA
43