Service and Installer Final Check List
Service
Data Rating Label and Wiring Diagram
Locations
The data rating label contains the model and serial
numbers. It can be found at the bottom on the left-hand
side of the appliance.
The electric wire diagrams and schematics are attached at
the back of the appliance, and should not be removed
except by a service technician, then replaced after use.
Before Calling Service
If the steam oven elements or indicator light do not turn on,
check the power source to see if the circuit breaker is off.
See the Use and Care Manual for troubleshooting
information. Refer to the Warranty Statement in the Use
and Care Manual.
To reach a service representative, see the contact
information on the back page of the manual. Whether you
write or call, please provide us with the Model Number,
Serial Number and Date of Original Purchase.
Installer Final Checklist
J-box with correct over-current protection is provided
for service cord connection.
Proper ground connection.
Owner is aware of location of the main circuit breaker.
Unit is level.
Door handle is level and centered. Door opens and
closes properly.
Specified clearances maintained.
All packaging material removed.
INSTALLER: Write the model number and serial
number found on the Data Rating Label in the
AND CARE MANUAL.
and the
MANUAL
INSTALLATION MANUAL
owner of the appliance.
Leave the
USE AND CARE
with the
English 7
USE