Operating Media - Vetus EP2200E Manual De Operación

7 Operating media

Coolant fluid
The preparation and monitoring of coolant in inter-cooled engines is
especially important because corrosion, cavitation and freezing can
lead to engine damage. Use as coolant a mixture of a cooling system
protective liquid (anti-freeze, ethylene glycol based) and tap water.
In tropical climates, where anti-freeze availability may be limited, use a
corrosion inhibitor to protect the engine cooling system.
The concentration of the cooling system protective liquid in the cool-
ant should not fall below/exceed the following limits:
Cooling system protective
liquid (Anti-freeze)
max. 45 vol%
40 vol%
min. 35 vol%
The protective liquid concentration must be maintained under all cir-
cumstances. Therefor if coolant must be added always use the same
mixture of anti-freeze and tap water.
Water Protection against
freezing to
55% -35°C (-31°F)
60% -28°C (-18°F)
65% -22°C (-8°F)
Water quality for coolant preparation
Use preferably tap water.
If an other available fresh water is used; the values given below must
not be exceeded.
Water quality
pH-value at 20°C (68°F)
Chloride ion content [mg/dm
Sulfate ion content [mg/dm
Total hardness [degrees]
Never use sea-water or brackish water.
Cooling system protective liquids must be disposed of
in accordance with environmental regulations.
Coolant
min. max.
6.5 8.5
3
] – 100
3 ] – 100
3 12
c
aution
W
arninG
37