GreenWorks Pro GPW 2300 Manual Del Operador página 12

ASSEMBLY
ASSEMBLING THE WHEELS
See Figure 3.
• Insert an axle through a wheel, a washer, and then the frame of the unit.
• Insert a cotter pin through the hole in the axle to secure. Repeat for second wheel.
Axle
Washer
Fig. 3
Cotter pin
ASSEMBLING THE FRONT PANEL AND GUN HOLDER
See Figure 4.
• Line up the screw sleeves with the holes in the upper handle and push through.
• Insert the screw and turn clockwise with a phillips head screw driver (not included) until the
screw is tight.
ASSEMBLING THE HOSE HOOK
See Figure 4.
• Line up the hose hook upper end with the holes on the back of the front panel
• Insert the hose hook end into the hole and push through.
• Press the hose hook lower end into the clip on the back of the front panel.
m
e
k
Fig. 4
l
12