Ground Fault Circuit Interrupter Protection; Servicing Of A Double-Insulated Appliance - GreenWorks Pro GPW 2300 Manual Del Operador

SAFETY INFORMATION
• Before starting any cleaning operation, close doors and windows. Clear the area to be
cleaned of debris, toys, outdoor furniture, or other objects that could create a hazard.
• Do not use acids, alkalines, solvents, flammable material, bleaches, or industrial grade
solutions in this product. These products can cause physical injuries to the operator and
irreversible damage to the machine.
W A R N I N G
High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at
people, animals, electrical devices, or the machine itself.
• Keep the motor away from flammables and other hazardous materials.
• Check bolts and nuts fixing the pressure washer shell for looseness before each use. A loose
bolt or nut may cause serious motor problems.
• Before storing, allow the motor to cool.
• When servicing use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
• ONLY use cold water.
• Make sure minimum clearance of 3 feet is maintained from combustible materials.
• Connect pressure washer only to an individual branch circuit.
• Hold the handle and wand securely with both hands. Expect the trigger handle to move when
the trigger is pulled due to reaction forces. Failure to do so could cause loss of control and
injury to yourself and others.
• Save these instructions. Refer to them frequently and use them to instruct other users. If you
loan someone this product, loan them these instructions also.
W A R N I N G
This product contains chemical(s) including lead, known to the State of California to cause
cancer, birth defects, and other reproductive harm. Do not drink water from this hose. Wash
hands after use.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

This pressure washer is provided with a ground-fault circuit-interrupter (GFCI) built into the plug
of the power-supply cord. This device provides additional protection from the risk of electric
shock. Should replacement of the plug or cord become necessary, use only identical replacement
parts that include GFCI protection.

SERVICING OF A DOUBLE-INSULATED APPLIANCE

In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product, nor should a means for grounding
be added to the product. Servicing a double-insulated product requires extreme care and
knowledge of the system, and should be done only by qualified service personnel. Replacement
parts for a double-insulated product must be identical to the parts they replace.
5