Specification; Introduction; General Cleaning Procedures; Fuse Replacement Information - Zhermack MX-300 Manual Del Usuario

10. Specification

Dimensions
Weight
Voltage
Maximum Power
Timer
Frequency

11. Introduction

Purpose of use: This product is for mixing alginate powder
Applied part: None
Classification: Class I
AP, APG: None
Emergency switching of disconnected device: By removing the power cord plug
Storage temperature: -20 °C to 60 °C (-4 °F ~140 °F)
Storage/transportation humidity: 35-95% RH
Storage atmospheric pressure: 700~1060hPa
Operation temperature: 5 °C - 40 °C
Operation time: Max. 20 seconds for each use
Rest period: 1 minutes after each use

12. General cleaning procedures

Caution: Prevent leakage of fluids onto the unit and see "safety precaution" sheet inside the box.
12.1 Cleaning (Gently wipe it with a piece of soft dry cloth)
12.2 Cleaning (Gently wipe it with a piece of cloth moistened with water)

13. Fuse replacement information

Warning
Electric shock hazard: During fuse replacement, make sure that all power to the system is shut off.

14. Electromagnetic interference

Caution: Keep this machine away from other equipment that will generate electromagnetic or other
interference.
The device has been tested to meet the following standards:
IEC/EN60601-1, IEC/EN60601-1-2, MDR 2017/745, and ISO13485

15. Waste disposal

Warning
Disposal hazard: This product contains materials which may require disposal through appropriately
licensed hazardous waste management.
The following materials are contained in the Alginate Mixer. Ensure proper disposal of hazardous and other
regulated waste in compliance with national and local regulations.
• Metal parts: Mainly made from steel, iron alloys, aluminum, aluminum alloys, copper, and copper alloys.
• Electrical parts: Mainly PC boards and electronic components.
• Other Materials: Mainly plastic, ceramic, silicon, and synthetic rubber.
12
EN
W205 x D245x H300 (mm)
17 Kg
AC220 V - AC240 V (50/60 Hz) / AC100 V - AC120 V (50/60 Hz)
400W
1-20 sec, adjustable by time
2,990 rpm (50Hz) / 3,600 rpm (60Hz)
Alginate Mixer MX-300