OPERATING INSTRUCTIONS
If ignition does not take place within 5 seconds, immediately
turn the control knob to the OFF position. Wait 5 minutes and
repeat step 4 above or refer to match lighting instructions in
manual.
If the igniter does not function, the burner can be lit by
holding a lit match to the burner while the control knob is
turned counter-clockwise to "HIGH."
NOTE: After the first use the stainless steel around the
burner will darken. This is a normal reaction of premium
stainless steel due to heat and is not a defect. The
infrared panel will also darken after initial use. This is
also a normal occurrence.
CARE AND MAINTENANCE
INFRARED BURNER CLEANING
After each use, it is necessary to burn the bottom
infrared burner with the hood open for at least five
minutes to vaporize any food drippings or particles.
Failure to perform this step will damage the burner. It
may occasionally be necessary to brush, blow, or
vacuum accumulated ash from the burner surface. Do
so carefully and only when the burner is cool.
PROTECTION OF INFRARED BURNERS
The burners of your grill are designed to provide a long life of satisfactory performance.
Rotisserie Burner Control Knob
29