Setup & Operating Functions; Changing The Batteries; Beginning Of Operation / „Quick Weighing; Setting Up Of The User Data - HMM Diagnostics smartLAB fit Manual De Usuario

III. Setup & Operating functions

Changing the batteries

• Please open the cover of the battery case at the back of the device.
• Insert 4 AAA batteries (1,5 V). Please pay attention to the polarity.
• Close the cover of the battery case.
Note: In case the scale does not operate please remove the batteries and insert them
again.
Your smartLAB
to
change the batteries. In case the batteries are almost empty, the symbol "Lo"
can be seen on the display. Please change the batteries.
Please remove the batteries in case you are not going to use the scale for one
month or more in order to avoid an automatic discharge of the batteries.
The scale as well as the batteries must be disposed of according to
the local regulations.
Beginning of operation / „quick weighing "
• Use the smartLAB
can stand on both legs. The scale starts measuring immediately and finally shows
your body weight on the display. When you leave the tread of the scale it deactivates
automatically.

Setting up of the user data

• In order to measure the adipose content and other parameter you first have to insert
your individual user data. You can store up to 8 user profiles and recall the measured
data.
Please press "SET" (on the side of your scale) to create a new user profile.
® fit body analyser scale has a symbol indicating that you have
fit body analyser scale bare-footed. Do not move so that you
®
27