Press one of the milk dispensing keys (32). The related
LED remains on and does not blink. The display appears
as follows:
KEY MENU
Type
repetition
Milk dose
Emulsion
Cold milk dose
Press the hot water dispensing key (12). The following
message will appear on the display:
The following hot water selection parameters can be
of 0.1 seconds).
19.5 Key menu - Steam and air selection (where contemplated)
Only on machines with the TURBOSTEAM system, without
If the frothed milk key is pressed or the frothed milk knob
(13) is turned, the following appears on the display:
(here 4 levels can be chosen, where 001
is less emulsion and 004 is continuous emulsion).
To display the messages in a different language from that
set, after entering into Programming mode, position the
cursor on the desired language by pressing the "+" (30)
and "-" (31) keys and then pressing the PRG (29) key. The
machine will restart with the messages provided in the
selected language.
The display (5) provides a choice of the following languages.:
Italian, English, German, French, Spanish, Portuguese,
Dutch, Japanese, Russian, traditional Chinese and modern
Chinese.
02_S39DV2.indd 24
19.3 Key menu - Milk selection
+
milk
001
07.0
05.0
05.0
19.4 Key menu - Hot water selection
(from 0 to 60, with increments
20. Language selection
The following cappuccino selection parameters can be
(it represents the number of distributions of
the selected drink, from 001 to 099);
(milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1););
((foamed milk dispensing time, from 0 to 60,
with increments of 0.1 seconds);
(cold milk dose; from 0 to 20 with increments
of 0.1 seconds);
the color of the LEDs during dispensing,
000 - 015).
The components - * - are applied only in some produit
KEY MENU
Type
Water dose
KEY MENU
Type
emulsion level
CUSTOMER PARAMETERS
SERVICE TIME
ITALIANO
ENGLISH
DEUTSCH
FRANCAIS
24 EN
+
water
05.0
+
steam and air
003
+
18/06/2014 15:15:33