LaCimbali M29 Selectron Manual De Instalacion Y Uso página 33

Steam dispensing
Plunge the steam jet pipe (6) into the liquid to be heated in a
suitable container and turn the steam adjustment knob (7).
When the liquid is hot, stop the flow of steam by turning knob
(7) the other way (towards "0").
Note: At the conclusion of each steam dispensing phase,
clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully
activate steam dispensing at least once.
Dispensing with the Turbosteam selector (7a) (when
provided)
Machines equipped with the TURBOSTEAM (STOP STEAM)
dispensing system have the "stop steam dispensing when
set temperature is reached" function, and can rapidly heat
and froth milk.
Select the type of milk you desire:
- using the knob (7a), clockwise (frothed) or counter-clockwise
(hot).
When the set temperature is reached, steam dispensing can
be stopped:
- automatically;
- manually, turning the knob (7a) in in any direction.
Temperature setting
The temperature setting for the "Stop Steam" function is factory
set at 72°C (161°F) and is therefore not set by the user.
Nevertheless, the standard setting can be changed within the
range of 45 and 85°C (113÷185°F).
To make this change:
- switch off the machine;
- remove the right side
- adjust the setting (R) on the Turbosteam card, keeping in
mind the corresponding number of notches and
temperature:
notch 0 = ~45°C (113°F)
notch 10 = ~85°C (185°F)
increment between the 2 notches = ~4°C (39.2°F)
The indication of intermediate temperatures is approximate;
after each adjustment, please use a thermometer to determine
the actual set temperature.
The ideal setting for milk frothing is set in the factory. If additional
adjustments must be made, turn the flow adjustment valve
(A):
- counterclockwise: more air > more frothy milk
- clockwise: less air > less frothy milk
Note: even slight turns of the valve (A) can make a great
difference in how the milk is frothed.
Correct alignment of the steam thermocouple is
performed in the factory: for this reason, do not
turn the adjusting screw (T).
12. Other hot beverage
7
6
View of the right side of the
31
machine
T
A
R
7
6
7a