Inserting The Tube Set - Stryker Fluid safe Instrucciones De Uso

Operating the Device
EN
Fig. 5-5

Inserting the tube set

Roller tube
(1)
Tube fastener
(2)
Irrigation tube
(3)
Nose
(4)
Instrument tube
(5)
Pressure chamber
(6)
(7) Membranes
Tap spikes
(8)
Fluid bags
(9)
Inserting the Roller Tube
Fig. 5-6 Position the roller tube
Roller tube
(1)
Tube fastener
(2)
Irrigation tube
(3)
Nose
(4)
(5) Instrument tube
Pressure chamber
(6)
Membranes
(7)
20
5.3 Inserting the Tube Set
(See Fig. 5-5) The tube set consists of three tube sections (1), (3) and (5), a
pressure chamber (6), one tube fastener (2), and two insertion spikes (8). The
tube sections are designated irrigation (3), roller (1), and instrument tube (5).
The tap spikes are used to connect the tube sections with the bags (9).
(1)
Inserting the roller tube is depicted in Fig. 5-6.
(1)
A
When inserting the roller tube, make sure not to damage the membranes (7)of
the pressure chamber. Insert the pressure chamber (6) only if not pressurized.
(2) (3)
(4) (7)
(5)
(6)
(2) (3)
B
(4)
(6) (5)
(7)
(9)
(8)