Intended Use; Technical Specifications - Torin TQ22001 Manual Del Propietário

IMPORTANT
Before You Begin Register This Product.
For future reference, record the model name, model number, date of manufacture and purchase date of this
product. You can find this information on the product.
____________________________
Model Name
____________________________
Model Number
____________________________
Date of Manufacture
____________________________
Date of Purchase
OWNER / USER RESPONSIBILITY
DO NOT OPERATE OR REPAIR THIS PRODUCT WITHOUT READING THIS MANUAL.
Read and follow the safety instructions. Keep Instructions readily available for operators. Make certain all
operators are properly trained and understand how to safely and correctly operate the product. By proceeding
you agree that you fully understand and comprehend the full contents of this manual. Failure to operate this
product as intended may cause injury or death. The manufacturer is not responsible for any damages or injury
caused by improper use or neglect. Allow product operation only with all parts in place and operating safely.
Use only genuine replacement parts. Service and maintain the product only with authorized or approved
replacement parts; negligence will make the product unsafe for use and will void the warranty. Carefully
inspect the product on a regular basis and perform all maintenance as required. Store these instructions
in a protected dry location. Keep all decals on the product clean and visible. Do not modify and/or use for
any application other than that for which this product was designed. If you have any questions relative to a
particular application, DO NOT use the product until you have first contacted the distributor or manufacturer to
determine if it can or should be performed on the product.
For technical questions please call 1-888-448-6746.

INTENDED USE

These penumatic heavy-duty Air/Hydraulic Quick Lift Service Jack has a powerful air motor to lift heavy loads.
A quick lift system allows the lifting ram to come in contact with the load faster. The compact design easily fits
between dual tandem axles. Ideal for lifting axles, farm vehicles, heavy-duty machinery, industrial equipment
and more.

TECHNICAL SPECIFICATIONS

Item
Capacity
Min. Lift Height (in.)
Max. Lift Height (in.)
Screw Top Adjustment(in.)
Operation
Working Pressure (PSI)
Air Inlet Size (in. ZG)
Safety Valve
Base L x W (in.)
Ensure that the air source can dedicate 100-175 psi to each jack operated. A minimum of 110 psi air pressure
is required ro raise rated capacity load.
Description
TQ22001
22 tons
8-5/8 in.
17 in.
4-1/8 in.
Air
100 to 175
1/4in.
Yes
21.73in. x 12.44in.
2
Autogoods "130"
TQ35001
35 Tons
9-13/16 in.
19-7/16 in.
4-1/2 in.
Air
100 to 175
1/4in.
Yes
21.73in. x 12.44in.