Publicidad
Idiomas disponibles
Idiomas disponibles
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii'ii'il
Tool power
switch (Paddle)
will not activate
the tool.
Lower blade
guard will not
return to locked
position.
Blade bolt is
tight but the
blade still spins
freely
Motor or motor
brush failure.
Wood chips or
debris blocking
guard.
Lower guard return
spring broken or
dislodged.
Guard lock broken.
Guard lock spring
broken.
Blade washer is not
aligned properly
with arbor shaft
After verifying power to
the tool and verifying that
the power switch (paddle)
activates properly, try the
following: Tap the plastic
body of the tool with a
plastic mallet or the plastic
handle of a screwdriver
and try again. If the tool still
does not operate, take to a
qualified service dealer for
repair.
Unplug tool! Remove any
debris that may be blocking
the guard. Blowout with an
air hose if available (wear
eye protection before using
air hose.)
DO NOT USE TOOL!
Take to a qualified service
dealer for repair.
DO NOT USE TOOL!
Take to a qualified service
dealer for repair.
DO NOT USE TOOL!
Take to a qualified service
dealer for repair.
Loosen blade bolt. Spin
blade washer slightly until
it aligns with arbor shaft
features and will no longer
spin. Retighten blade bolt.
19
Publicidad
