Craftsman SEARS Manual Del Proprietário página 2

iMPO RrANT o,
_b THIS SYMBOL POINTSOUT IMPORTANT SAFETYINSTRUCTIONS WHICH, IF NOTFOLLOWED,COULD ENDANGER THE PERSON-
AL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL
BEFOREATTEMPTING TO OPERATEYOUR CHIPPER-SHREDDER.FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY
RESULTIN PERSONALINJURY. WHENYOU SEETHIS SYMBOL: ,{k HEEDITS WARNING.
DANGER:
Your chipper-shredderwas built to be operated accordingto the rules for safe operation in this manual.
As with any type el power equipment, carelessness or error on the part of the operator can result in
serious injury. This chipper-shredder is capable of amputating fingers and hands and throwing objects.
Failure to observethe following safety instructionscouldresult in seriousinjury or death.
_11 !. GENERAL OPERATION
1. Readthis owner's guide carefully in its entirety before attempt-
ing to assemblethis machine. Read, understand, and follow all
instructions on the machine and in the manual(s) before opera-
tion. Be completely familiar with the controls and the proper
use of the machine before operating it. Keep this manual in a
safe place for future and regular reference and for ordering
replacement parts.
2. Your chipper-shredder is a powerful tool, not a plaything.
Therefore, exercise extreme caution at all times. Your unit has
been designed to perform two jobs; to chip and shred vegeta-
tion found in a normal yard. Do not use it for any other pur-
pose.
3. Neverallow children under age 16 to operate the unit. Children
16 years and older should only operate the unit under close
parental supervision. Only responsible individuals who are
familiar with these rules of safe operation should be allowed to
use your unit.
4. Keep the area of operation clear of all persons, particularly
small children and pets. Stop the engine when they are in the
vicinity of the unit. Keepwork area clean and clear of branches
or obstacles which could cause you to stumble or fall.
5. When feeding materia! into this equipment, be extremely care-
ful that pieces of metal, rocks, bottles, cans or other foreign
objects are not included. Personal injury or damage to the
machine could result.
6. Always wear safety glasses or safety goggles, during operation
and while performing an adjustment or repair, to protect eyes
from foreign objects that may be thrown from the machine.
7. Wear sturdy, rough-soled work shoes and close fitting slacks
and shirt. Shirt and slacks that cover the arms and legs and
steel-toed shoes are recommended. Do not wear loose fitting
clothes or jewelry and secure hair so it is above shoulder
length. They can be caught in moving parts. Never operate a
unit in bare feet, sandals or sneakers. Wear g!oves when feed-
ing material in the chipper chute or shredder hopper.
8. Never place your hands, feet, or any part of your body into the
shredder hopper, chipper chute, discharge opening, or near
any moving part while the engine is running. Keepclear of the
discharge opening at all times. If it becomes necessary to
push material into the chipper chute or shredder hopper, use a
small diameter stick, NOTYOUR HANDS.
9. If it is necessary for any reason to unclog the feed intake or
discharge openings or to inspect or repair any part of the
machine where a moving part can come in contact with your
body or clothing, stop the machine, allow it to cool, disconnect
the spark plug wire from the spark plug and move it away from
the spark plug before attempting to unclog, inspect or repair.
10. Do not operate unit while under the influence of alcohol or
drugs.
11. The machine should only be operated on a level surface. Never
operate your unit on a slippery, wet, muddy or icy surface.
Keep your work area clean and clear of branches or obstacles
which could cause you to stumble and fall. Do not overreach.
Maintaining proper footing and balance is essential to prevent-
ing accidents.
12. Do not allow an accumulation of processed material to build-
up in the discharge area as this will prevent proper discharge
and can result in kick-back from the chipper chute.
13. Keep your face and body back from chipper chute to avoid
accidental bounce back of any material.
14. Do not transport machine while engine is running.
15. If the cutting mechanism strikes a foreign object or if your
machine should start making an unusual noise or vibration,
immediately stop the engine and allow the machine to come to
a complete stop, Disconnect the spark plug wire and move it
away from the spark plug. Take the following steps.
• Inspect fordamage.
• Repair or replaceany damaged parts.
• Check for any loose parts and tighten to assure continued
safe operation.
16. Never attempt to attach or remove catcher bag when engine is
running. Shut the engine off and wait for the impeller to come
to a complete stop. The impeller continues to rotate for a few
seconds after the engine is shut off. Never place any part of
the body in the impeller area until you are sure the impeller has
stopped rotating.
17. Muffler and engine become hot and can cause a burn. Do not
touch.
18. Do not allow leaves or other debris to build-up on engine's
muffler. The debris could ignite and causea fire.
19, Do not attempt to shred or chip material larger than specified
in this manual. Personal injury or damage to the machine
could result.
20. Do not operate engine if air cleaner or cover over carburetor
air-intake is removed, except for adjustment. Removal of such
parts could create a fire hazard.
21. Only use accessories approved for this machine by the manu-
facturer. Read, understand, and follow all instructions provid-
ed with the approved accessory.
22. If situations occur which are not covered by this manual, use
care and good judgment. Contact your dealer for assistance.
23. Keep discharge chute deflector, chipper chute door, and all
other guards and safety devices in place and operating proper-
ly.
24, Only operate unit in good daylight. Do not operate unit at night
or in dark areas where your vision may be impaired.
dl_ll II. CHILDREN
Tragic accidents can occur if the operator is not alert to the pres-
ence of small children. Children are often attracted to the chipper-
shredder and the chipping and shredding activity. Never assume
that children will remain where you last saw them.
1. Keep children out of the work area and under the watchful eye
of a responsible adult other than the operator.
2. Be alert and turn the unit off if a child enters the area.
3. Never allow chitdren under the age of 16 to operate the chip-
per-shredder.