Multi-Angle Footrest - Ki Mobility Liberty FT Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
K. Multi-Angle Footrest
1. Changing Footrest Angle (Fig. 14)
The Multi-Angle Footrest utilizes a ball joint which allows the footrest to be set in a variety of
angles just by applying pressure to different areas on the top of the footplate.
Fig. 14
Ball Shaft - Up Position
2. Changing Footrest Height
a. Remove footplate assembly from hanger by removing screw (Fig. 15:G), washer (Fig. 15:F),
washer (Fig. 15:E), saddle spacer (Fig. 15:D), washer (Fig. 15:C), washer (Fig. 15:B) and nut
(Fig. 15:A) using a 5mm Allen wrench and a 10mm wrench.
b. Slide the footplate assembly to desired height and reinstall hardware in nearest hole.
A
Ball Joint
B
C
E
Ball Shaft - Down Position
D
21
Fig. 15
F
G
Ball Joint