Industry Canada Notice To Users - Motorola Connect & go Manual Del Usuario

For products that support Wi-Fi 802.11a (as defined in the product specifications available at
www.motorola.com), the following information applies. This equipment has the
capability to operate Wi-Fi in the 5 GHz Unlicensed National Information Infrastructure
(U-NII) band. Because this band is shared with MSS (Mobile Satellite Service), the FCC has
restricted such devices to indoor use only (see 47 CFR 15.407(e)). Since wireless hot spots
operating in this band have the same restriction, outdoor services are not offered.
Nevertheless, please do not operate this device in Wi-Fi mode when outdoors.

Industry Canada Notice to Users

This device complies with Industry Canada license-exempt RSS standard(s). Operation is
Industry Canada Notice
subject to the following two conditions: (1) This device may not cause interference and (2)
This device must accept any interference, including interference that may cause undesired
operation of the device. See RSS-GEN 7.1.5. This Class B digital apparatus complies with
Canadian ICES-003.
Use & Care
To care for your Motorola product, please keep it away from:
Use & Care
liquids of any kind
Don't expose your product to water, rain, extreme humidity, sweat, or other
moisture. If it does get wet, don't try to accelerate drying with the use of an
oven or dryer, as this may damage the product.
extreme heat or cold
Avoid temperatures below -10°C (14°F) or above 60°C (140°F). For battery
powered accessories, do not recharge your accessory in temperatures below
0°C (32°F) or above 45°C (113°F).
microwaves
Don't try to dry your product in a microwave oven.
dust and dirt
Don't expose your product to dust, dirt, sand, food, or other inappropriate
materials.
14