Kinetec Spectra Essential Manual De Empleo página 17

Using the Plastic Comfort Case kit
Specially designed to improve comfort and hygiene for the patient.
Plastic Comfort Cases come with clips, fixed directly on the tubes of the machine's thigh and lower limb
support segments, and straps with protection stops to precisely and quickly adjust to the patient's leg
dimensions.
CLEANING
To ensure optimal hygiene, clean the supports after each patient use. To clean, spray the surfaces with
disinfectant (use a propanol/isopropanol or aldehyde-based solution).
Replacement parts
a 4670024048 Complete foot support
b 4635010561 Foot support strap kit
c 4635010157 Tibia case only
d 4670024329 Tibia case with straps
e 4635010165 Femur case only
f 4670024337 Femur case with straps
g 4650001876 Single strap
Part number to order a complete kit:
- fastening with clips: 4670024345
- fastening without clips: 4670023701 (if your
machine is not fitted with clips).
Use of the Kinetec Patient Pad Kit
The KINETEC Patient Pad Kit is designed for rapid fitting, optimal hygiene and maximum patient comfort.
- For using and positioning the straps, please refer to here under. Make sure that the self-adhesive parts
(19) are visible.
- Place the sponge side next to the skin.
FOR OPTIMAL HYGIENE, A NEW SET OF PADS SHOULD BE USED FOR EACH PATIENT.
CLEANING:
- Sterilization of the pads (if necessary): Sterilized at 134 °C during 18 minutes.
- Disinfecting of the pads: Washing at 30°C with use of a disinfecting solution during the rising cycle.
Example of products that can be used: Solution " Baclinge" at 0.125 % or "Souplanios" at 0,125% from
ANIOS Laboratory. A complete list of distributors in your country is available on request.
The KINETEC Spectra is delivered with a complete set. Components:
- 4 straps (4650001107)
- 1 foot support (4650001420)
- 1 cover (4650001090)
Part number to order the complete set: 4650001868
Spectra Essential
Each cover is provided with a label to record the patient's name
19
a
b
g
EN
c
d
e
5/9
f