Assembly - Bissell 2259 Serie Guia Del Usuario

Assembly

The only tool you will need to assemble your vacuum is a
Phillips screwdriver.
1
Place the
upper handle
onto the base
and push it
down. Then
attach the
handle with
the 2 screws
taped to the
handle in a
plastic bag.
4
Wrap hose up and around
the hose wrap on the
handle. Slide end of hose
into vacuum base.
7
Now, put your accessory tools on the vacuum and you're ready to go!
Dusting Brush Tool
Febreze and Febreze logo is a registered trademark of The Procter & Gamble Company,
Cincinnati, Ohio used under license by BISSELL Homecare, Inc.
2
Insert the extension wand
base and turn it to the right
to lock in place.
5
To install the optional
Febreze
the tank release button
and pull container from
vacuum. Lift tab to
access and remove foam
filter from lid.
Pet Hair Eraser
NOTE: Flexible Pet Crevice Tool does not store on board.
Filter, press
®
Tool Pet TurboEraser
®
3
Insert the hose end into the
back of the vacuum and
twist right to lock in place.
6
Replace foam filter with
Febreze filter. Close tank
®
lid. Place tank back on
vacuum and press firmly
until you hear a "click."
Tool Extension Wand
®
www.BISSELL.com
click
5