Travelling, Steering, Braking; Travelling - Jungheinrich EKS 314 Manual De Instrucciones

3

Travelling, Steering, Braking

EMERGENCY DISCONNECT
– Press the EMERGENCY
DISCONNECT switch (5) down.
All truck movements are inhibited.
The operation of the switch must not
be affected by any objects placed in its
way.
3.1

Travelling

The truck can be driven in 3 modes:
Free travel, with wire or rail guidance.
The operating mode employed depends on the guidance system of the racking sys-
tem in use.
IMPORTANT Do not drive the truck unless the panels are closed and properly locked.
The foot switch must be kept depressed for travel.
3.1.1 Travelling in apron field
– Close the safety gates.
– Turn the EMERGENCY
DISCONNECT switch (5) to release it.
– Put the key in the key switch (3) and
turn it clockwise; the "operational" dis-
play lamp will be lit.
– Apply the foot switch (37).
– Carry out a test run, see Page E6.
– Raise the main lift with the hydraulic
control button (2) until the forks are
clear of the ground.
– Slowly turn the travel control button (1)
with your right thumb.
Turning in drive direction (F)
= Forward travel
Turning in load direction (R)
= Reverse travel
– You can control the travel speed by
continuing to turn or by adjusting the
travel control button.
– Use the steering wheel (10) to steer
the truck in the required direction.
10
F
1
2
F
R
5 3
37
R
E 13