Assembly - Bissell POWERTRAK 1790 Serie Guia Del Usuario

Assembly

The only tool you will need to assemble
your vacuum is a Phillips screwdriver.
1
Slide handle down over body of vacuum.
3
Insert hose with elbow end facing down
and align, locking tab with slot. Rotate
clockwise until snapped into place.
5
Install Pet TurboEraser Tool in front of
vacuum by inserting end upward into
handle until "clicks".
NOTE:
The Long Reach Dusting Tool does not store on-board (see Tools section for usage).
Febreze and related trademarks are owned by the Procter & Gamble Company, Cincinnati, Ohio and used under license by Bissell Homecare, Inc.
2
Insert two screws and fasten using
screwdriver.
4
Take the opposite end of the hose and open
the foot base door. Insert hose end into foot
and push into place.
Once inserted into the foot, hose should be
stretched into the side and upper hose clips.
6
Select models include a Febreze® filter. To
switch your filter, remove the dirt tank by
pushing the release button on the tank
handle and lifting away.
www.BISSELL.com
5