Adding A Packlite; Power Amplifier Model A1 (Optional); Connecting Multiple B1 Bass Modules - Bose L1 Model II Guía De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
English
Dansk
Deutsch
Español
Dansk

Adding a PackLite

Figure 8
Connecting the A1
amplifier to the power
stand
Français
Deutsch
Italiano
Nederlands
Español
®

power amplifier model A1 (optional)

Connecting multiple B1 bass modules

®
Using a PackLite
power amplifier model A1 allows you to add one or two additional B1
modules to your system. Refer to the A1 owner's guide for detailed operating instructions.
1. Make sure the A1 amplifier power switch is OFF.
2. Plug one end of the supplied ¼" TRS cable into the Bass - Line Out connector on the
power stand. Plug the other end into the INPUT connector on the A1 amplifier.
3. Connect a B1 bass module cable from the OUTPUT connector on the A1 to a B1 bass
module. If desired, connect a second B1 to the first B1.
4. Plug one end of the AC power cord into the A1 amplifier and plug the other end into an
AC (mains) outlet.
5. Switch the A1 power switch to ON (I).
Power stand
Bass - Line Out
CAUTION: DO NOT stack more than four B1 modules in a column.
Français
Svenska
Italiano
PackLite
®
power
amplifier
Nederlands
Svenska
S
S
YSTEM
Additional B1
bass modules
ETUP
15

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

L1 ii

Tabla de contenido