objects filled with liquids, such as vases, shall be placed on the apparatus.
16.The MAINS plug is used as the disconnect device and shall remain readily
operable.
17.Always leave sufficient space around the product for ventilation. Do not place product in
or on a bed, rUIL in a bookcase or cabinet that may prevent air flow through vent
openings.
18.Do not place lighted candles, cigarettes, cigars, etc. on the product.
19.Care should be taken so that objects do not fall into the product.
20.The MAINS plug is used as the disconnect device and shall remain readily operable.
21.Where there is more than one connection supplying HAZARDOUS VOLTAGES or
HAZARDOUS ENERGY LEVELS to equipment, a prominent marking, located close to the
entry point provided for a SERVICE PERSON to gain access to the hazardous parts, shall
be provided to indicate which disconnect device or devices isolate the equipment
completely and which disconnect devices can be used to isolate each section of the
equipment.
WARNING:
This symbol indicates that this
product incorporates double
insulation between
hazardous
mains voltage and user
accessible parts.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH
MODIFICATIONS COULD
VOID THE USER'S AUTHORITY TO OPERATE THIS EQUIPMENT.
NOTE
: The speaker incorporates a magnetically shielded design that can be used in close
proximity to most monitors. However, when placed within 6-8 inches of some CRT monitors,
the speaker may cause color
distortion.
To correct the problem, turn off and unplug the
monitor and relocate the speaker farther away from the monitor. Wait for 1S minutes and
then turn the monitor back on. Most computer monitors have a degauss option in their
setup
menu.
When available, you can use the degaussing function to restore normal color
display.
COMPLIANCE WITH FCC
REGULATIONS: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide
2