Tabla de contenido
Publicidad
HEAD UNIT - AUDIO SYSTEMS
$% 86.50.81
Remove
1. Disconnect battery earth lead.
1. Disconnect battery earth lead.
2. Remove audio unit escutcheon.
2. Remove audio unit escutcheon.
3. Insert removal tools into slots either side of head
3. Insert removal tools into slots either side of head
unit. Push removal tools upwards and pull head unit out of
aperture.
4. Disconnect multiplugs, aerial cable and auto changer
4. Disconnect multiplugs, aerial cable and auto changer
data cable (if fitted). Remove head unit.
5. Release retaining tags and remove cage from centre
5. Release retaining tags and remove cage from centre
console.
Refit
1. Position audio unit cage to centre console and
1. Position audio unit cage to centre console and
secure with retaining tags.
2. Position audio unit, fit threaded rubber bung,
2. Position audio unit, fit threaded rubber bung,
connect aerial cable, CD auto changer data cable (if fitted) and
multiplugs.
3. Slide audio unit into cage until retaining clips engage.
3. Slide audio unit into cage until retaining clips engage.
Ensure that rubber support stud locates in rear support
plate.
ELECTRICAL
4. Fit audio unit escutcheon, ensuring that the felt strip
4. Fit audio unit escutcheon, ensuring that the felt strip
is located on the bottom inner edge. Locate the top edge lugs and
then push the bottom edge in until the retaining tags click into
position.
5. Connect battery earth lead.
5. Connect battery earth lead.
6. Check audio unit including CD auto changer for
6. Check audio unit including CD auto changer for
correct operation and program suitable radio stations on
all pre-sets.
86-15
REPAIRS
Publicidad
Tabla de contenido
