Oase Profinaut 6000 Instrucciones De Uso página 6

- English -
Malfunction
Malfunction
The unit is not operating
Unit delivers very little or not at
all
The unit switches off, then on
again after some time
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.
Storage/Over-wintering
The unit is frost resistant to -4°F (- 20 °C). Should you store the unit outside of the pond, clean it thoroughly with a soft
brush and water, check it for damage, then store immersed in water or filled with water. Do not immerse the power plug
in water!
Repair
A damaged unit cannot be repaired and must be put out of operation. Dispose of the unit in accordance with the
regulations.
6
Cause
- No power supply
- Fuse defective
- FI switch tripped
- Pump rotor blocked
- Strainer not covered by water
- Slide valve closed
- Air pocket in the system
- Strainer cheeks clogged
The unit is overheated.
- Fluid temperature above 35°C
- Inner cooling channels clogged
Remedy
- Check power supply
- Check fuse and replace if necessary
- Check switch system and connection cable
- Rotor may be blocked by foreign bodies in the housing,
check filter
- Clean (descale) the pump
- Check water level and position of the pump
- Check the hose system
- Check the hose system
- Check and clean
- Operate the unit with cooler fluid
- Have the unit interior cleaned by an expert