General Information/Overview/Safety Precautions; Safety Precautions - L.B.White Foreman CI230 Manual Del Usuario E Instrucciones

General Information
This Owner's Manual includes accessories commonly
used on this heater. These accessories must be
ordered seperately.
When calling for technical service assistance, or for
other specifi c information, always have model
number, confi guration number and serial number avail-
able. This information is contained on the dataplate.
This manual will instruct you in the operation and care
of your unit. Have your installer review this manual with
you so that you fully understand the heater and how it
functions.
Contact your local L.B. White distributor or the
L.B. White Co., LLC for assistance, or if you have
any questions about the use of the equipment or its
application.
The L.B. White Co., LLC has a policy of continuous
product improvement. It reserves the right to change
specifi cations and design without notice.

Safety Precautions

■ Do not use this heater for heating human living quarters, garages, workshops, or other such
confi ned spaces.
■ The fl ow of combustion and ventilation air must not be obstructed.
■ Proper ventilation air must be provided to support the combustion air requirements of the heater
being used.
■ Lack of proper ventilation air will lead to improper combustion.
■ Improper combustion can lead to carbon monoxide poisoning leading to serious injury or death.
Symptoms of carbon monoxide poisoning can include headaches, dizziness and diffi culty in breathing.
■ Proper ventilation air for combustion must be provided in accordance with OSHA 29 CFR 1926.154,
Temporary Heating Devices, ANSI A10.10, Safety Requirements for Temporary and Portable Space
Heating Devices, or the Natural Gas and Propane Installation Code, CAN/CSA B149.1 as appropriate.
CAUTION
Fire and Burn Hazard
■ Hot while in operation.
■ Do not touch.
■ Keep children, clothing, and combustibles away.
Foreman Ductable Oil Indirect-Fired Heater
Overview
The heater is equipped with a burner assembly. The
assembly includes an electronic igniter, solenoid
valves, and burner head with orifi ce. When the heater
is turned ON, the igniter will spark, with gas delivered
through the solenoids to the burner orifi ce. Ignition
will occur.
The burner will heat the heat exchanger. After a
predetermined time frame has passed, a fan controller
will start the main blower motor, and blow cool air over
the heat exchanger. The cool air will be preheated by
passing over the heat exchanger, with warm, dry air
delivered the area to be heated.
Combustion by- products created during the heating
process will be transferred up a vent stack directly to
the outside, thereby providing only clean, dry air to the
heated area.
When the heater is turned OFF, the burner motor is
de-energized turning off the fuel pump. The solenoid
valves will close cutting off fuel to the burner nozzle.
The fan controller will continue to run the main blower
motor for a predetermined period of time to allow the
heat exchanger to cool down. After this time frame
has elapsed, the fan controller will disconnect power
to the fan motor, thereby shutting the fan motor down
completely.
WARNING
Asphyxiation Hazard
Owner's Manual • Foreman
5