Alarm Actions; Alarm Dwell; Main And Spot Monitor Displays; Playback Display - Dedicated Micros system sprite Guia Del Usuario

Alarm Actions

This menu is not displayed if the Alarms option in the Detection Period
menu (page 16) is set to always off.
This menu is used to determine what action the multiplexer will take
when an alarm is triggered.

Alarm dwell

The Alarm dwell is used to extend the length of the original alarm
trigger. The dwell time range available is 000 (default) to 999
seconds.

Main and Spot monitor displays

The Main and Spot monitor displays can be selected to switch to a full
screen image of the alarmed camera(s). The options available are:
Last alarm Displays pictures from the last alarmed camera (default).
Sequence alarms Displays any simultaneous camera alarms in a sequence.
Unchanged No change to the monitor on alarm.
Note: The Main monitor will automatically return to the previously displayed image when the alarm clears.

Playback display

All alarm events detected by the system are tagged when recorded to the VCR. When the tape is played back using a multi screen
display, this recorded alarm tag can be made to switch the main monitor to Full screen. The options available are:
Full Displays the alarm in Full screen (display).
Unchanged Display remains unchanged on alarm.
To Navigate Œ
Use the UP/Down keys to select Option
To Exit
Press the
MODE
18 Alarm Actions
Alarm dwell
Main monitor display
Spot monitor display
Playback display
Alarm relay (R1)
Alarm record
Alarm message
16:49:52
•
Use the Right key to enter Edit Field
or
key to select next Menu Press and Hold the
Alarm Actions
000 sec.
Last alarm
Sequence alarm
Full
Close
Interleave
On
04/03/1999
Ž
Use the Up/Down keys to edit.
key to leave menus.
MODE
Version 1.0
VEXT