Peavey Transtube Serie Manual De Instrucciones página 24

Global
MIDI Channel will go from 1 (Preset Matrix Selector LED A1) to 16 (Preset Matrix Selector LED D4).
Footswitch/SysEx will always work. Channel messages will be sent with this channel, and will be
ignored on receive unless on this channel. Default = MIDI channel 1.
User on Powerup - default is Factory patches on powerup - LED off. Turn on for USER patches on
powerup.
Bank Select Style will be
0 = (default) go to same patch in new bank [7:00/min]
1 = go to patch #1 in new bank [12:00]
2 = wait for user to press a preset footswitch before switching (current red blinks)
[5:00/max]
Footswitch All-Info will be:
0 = Only shows LED's of current mode (either greens or reds/yellows.) Less info, less
confusing. [7:00/min]
1 = (default) Shows dim LED's for the inactive mode (e.g. greens when NOT in EFX mode.)
[12:00]
2 = Shows all LED's bright in either mode. Good for seeing everything in brighter light
where the dim level could wash out. [5:00/max]
Mono / Stereo - defaults to Mono [7:00/min]. Set to 5:00/max] for stereo when using the TRS stereo
FX send jack.
Noise Gate Sensitivity - Increase this to get more gating effect. Reduce to get a gentle reduction.
Noise Gate Threshold - Set this while the guitar volume is up but the strings are muted. Turn
Sensitivity up all the way, then turn this up until you hear the noise drop out. Then go up just a bit
more (one or two LED changes). Then reduce the sensitivity to taste. This should only have to be
changed if the incoming noise level changes, e.g. changing guitars or environments. Turning this all
the way down disables the noise gate.
Tuner
Store Tuner Tweaks - Tuner will not remember your preferences unless you save them. (Just press
once).
E mode - Press the USER switch to toggle between E and E mode. The LED will be lit for E mode.
All notes are moved up on the display - even in chromatic mode. We offer this since E tuning is so
popular among guitarists.
Chromatic mode - Press the TAP switch to toggle between guitar and chromatic mode. The LED
will be lit for chromatic mode. We offer this so you can use open tunings and not have to bring a
separate tuner.
Tuner Volume - Defaults to 12:00 position. Turn up or down to change the bypass volume level
while tuning. Turn all the way down for silent tuning.
24