Information On How To Dismantle And Dispose Of The Appliance; Information To Users - Giabau P-2510 Instrucciones Para La Instalación Y Para El Uso

going leftwards. On having three layers and
having reached the right side of the roller,
cut the steel-wool diagonally arranging it
very carefully on the head of the roller. The
steel-wool must be held tight, from the
beginning to the end of this procedure.
Apply the jute sheet keeping it parallel to the
roller, and slide it in until wrapping has been
completed.
Increase the thermostat temperature by
setting it at 100°C and make the roller turn
for about ten minutes until the first part of the
layer has completely settled. Wait until the
temperature falls below 50°C and lift up for
about 100 mm an edge of the jute sheet, and
slide the flannel layer underneath it.
Lower the basin in order to entirely wrap the
flannel layer, then raise the basin and lift up
for about 100 mm an edge of the flannel
layer, and correctly slide in the cotton sheet.
The sheet has to be well centred onto the
roller and inserted from the more narrow
side. Its strings have to be on the sides of the
ironer and its seams facing downwards.
Allow the roller to turn for a few minutes until
the entire cover is well stretched out.
Pull the strings moderately until the sheet sits
on the heads of the roller and then tighten and
insert these under the hem of the sheet itself.
With fume-extracting models featuring and
lamellar padding lining it is advisable to
remove the laundry-detaching device before
replacing the flannel layer. After
replacement the laundry-detaching device
must be fastened back again by its four
screws in its fixed place. No adjustment is
therefore required. (fig.5)
8.4 IDENTIFYING AND ORDERING
SPARE PARTS
In order to identify the code numbers of
spare parts refer to the drawings with the
exploded view of the appliance and the related
spare-parts list. After identifying the desired
code numbers, send a customary written
order including code numbers and description
of the spare parts. Also inform the
manufacturer of the model, serial number,
power supply voltage and frequency of your
appliance.
9. INFORMATION ON HOW TO
DISMANTLE AND DISPOSE OF THE
APPLIANCE
When the appliance will be considered
unserviceable, dismantle it and dispose of
the components as indicated in paragraph 3.
Sort out the various components of the
appliance in accordance with the refuse
disposal standards in force in your country,
so as to dispose of them separately or recycle
them appropriately. All machine parts can
be regarded as being solid urban refuse,
except for the metal parts which are not
regarded by most European countries as
being particular refuse.

INFORMATION TO USERS

Pursuant to article 13 of law decree 25 July
2005, nr. 151 relating to "Implementation
of Directives 2002/95/EC, 2002/96/EC and
2003/108/EC concerning the reduction in
the use of hazardous substances in electric
and electronic apparatus, as well as waste
disposal"
The deleted dustbin symbol on the appliance
indicates the product must be disposed of
separate from other wastes once it reaches
the end of its life cycle.
Once the appliance has reached the end of its
life cycle, the user must therefore take it to a
suitable pre-sorted waste centre for electronic
and electro-technical appliances, or return it
to the dealer on purchasing a new similar
appliance, on a one for one basis.
Adequate pre-sorted waste collection before
subsequently sending the appliance for
recycling, treatment and environmentally
compatible disposal helps avoid possible
negative effects on the environment and
health and favours the recycling of the
materials making up the appliance.
Unlawful disposal of the product by the user
is punishable by the administrative sanctions
indicated in law decree nr. 22/1997 (article
this
50 and following articles of law decree nr.
22/1997)
16