Maintenance - Amprobe LT-10 Manual De Uso

Non-contact voltage
sensitivity (with probe)
Drop proof
Operating time
Operating temperature -10
Storage temperature
Operating altitude
Battery
Battery life
Dimensions
(L x W x H)
Weight
Safety compliance
EMC compliance
Certification
MAINTENANCE AND REPAIR
If the instrument fails to operate, check the battery and replace as
necessary.
Do the following:
1. Replace the battery if the tester does not work.
2. If antenna is not working, check the antenna connection. Make sure the
antenna is locked and secured.
3. Review the users manual to better understand how the tester operates.
LED illuminates and beeps at approximately 3 mm
(0.12 in) distance from a wire carrying 120 Vac
LED illuminates and beeps at approximately 5 mm
(0.2 in) distance from a wire carrying 230 Vac
1 meter
One second ON, one second OFF for maximum
five cycles and wait for 1 minute before making
another measurement
C to +50 C (14
O O
-10 C to +50 C (14
O O
Up to 2000 meters
1 x 9V lithium or alkaline battery only,
6LR61/6LF22/MN1604 or equivalent
500 tests (alkaline typically)
Approximately 170 x 40 x 24 mm
(6.69 x 1.57 x 0.94 in)
Approximately 80 g (0.18 lb) with battery
installed
IEC 61010-1, UL 61010-1
CAN/CSA-C22.2 No. 61010-1-2004
IEC 61326-1
CSA and CE
13
F to 122 F) ≤85% RH
O O
F to 122 F) ≤85% RH
O O