Balluff BSP B Serie Manual De Instrucciones página 19

Standard and High-End Pressure Sensors
BSP-B... /-V... /-M... /-W... /-K...
Type code for pressure sensors with analog outputs
Physical unit
M = Millibar
W = Millibar, vacuum (from –1 bar)
B = Bar
V = Bar, vacuum (from –1 Bar)
K = Kilobar
Max. pressure range (value correlates with phys. unit)
001 = 1
010 = 10
100 = 100
999 = 999
Process connection and housing
E = Internal thread 1/4"
G = Internal thread 1/4" NPT
Seal/sealing system (see BHS code)
V = Viton sealing ring (ISO: FKM, DIN: FPM)
Housing type
002 = 1st generation D34x~90. Stainless steel pressure connection, display in
PA6, rotates 320°, process connection opposite display, el. connection on side
003 = 1st generation D34x~90. Stainless steel pressure connection, stainless steel
display, rotates 320°, process connection opposite display, el. connection on side
Interface to PLC
A = Analog data (actual value + switching point)
Output function/output technology
00 = 1 x PNP, NO/NC selection, 1 x 0...10 V
01 = 1 x NPN, NO/NC selection, 1 x 0...10 V
02 = 1 x PNP, NO/NC selection, 1 x 4...20 mA
03 = 1 x NPN, NO/NC selection, 1 x 4...20 mA
Variant/options
A = Basic variant
Subversions based on main version
0 = Basic variant
Operating elements
B = Display, 2 buttons
Connector system
S4 = M12, 4-pin
Special characteristics or design (optional)
Z = General special design
T = Temperature-resistant
www.balluff.com
BSP - B010 - E V 002 - A 03 A 0 B - S4 - T
English 9