Cleaning The Filters; Cleaning The Pre-Motor Filters - VAC AirCompact C85-AM-B-E Manual De Instrucciones

Cleaning the Filters

WARNING!
Always switch off and unplug the vacuum cleaner from the electrical outlet before assembling, opening or emptying
the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT:
Filters need to be cleaned every time you empty the dirt container for best cleaning results.
The pre-motor filters can be washed by hand. Clean the pre-motor filters with water only. The HEPA post-motor
filter may not be washed or re-used. Do not use your vacuum cleaner without all of the filters in place.

Cleaning the pre-motor filters

Hold the dirt container
and twist the lid anti-
clockwise.
Cleaning the HEPA post-motor filter
Post-motor filter is located
in the right wheel. Hold
the centre of the wheel
cover and twist wheel
cover anti-clockwise.
Lift the lid to reveal the
pre-motor filter. Lift out
the pre-motor filter.
With the wheel cover off
the post-motor filter is
easily removed.
Check the secondary pre-
motor filter mesh for dirt.
If dirty, lift it out as well.
Tap all excess dirt off the
filter. It might become
necessary to use the 2in1
tool for advanced cleaning.
Do not wash.
GB
Tap excess dirt from the
filters or rinse them and
leave to dry for 24 hours.
Insert them and close the
lid by turning it clockwise.
click!
Re-insert the post-motor
filter. Hold the centre of
the wheel cover and twist
wheel cover anti-clockwise,
until it clicks into place.
25