Remove/Empty Dirt Container
WARNING
To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
The dirt container is full. Time to empty!
3
Hold the dirt container over a trash
bin and press the Empty Button. Once
emptied, snap bottom back into place.
WARNING
Do not operate vacuum with damp or wet filters. Allow components to dry before
reassembling the dirt container.
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
2
Press the Release Button and grab the handle
to pull the dirt container away from vacuum.
4
Return the dirt
container to the
vacuum, securing the
bottom in place first
and then pushing back
until you hear a "click".
www.BISSELL.com
11