Bissell PET HAIR ERASER LIFT-OFF 2087 Serie Guia Del Usuario página 15

Replace Brush and Belt
1
Unplug and turn vacuum
over. Unscrew 10 Phillips
head screws to remove
bottom cover.
4
1. Place belt back on brush roll.
2. Pinch belt around brush roll & hook
back around the motor gear.
NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum
off and unplug from electrical outlet. Remove obstruction and brush will
automatically reset when vacuum is plugged and turned back on.
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com and enter
your model number in the search field.
2
Pull roller straight out and
slide belt off motor gear.
Replace roller and/or belt.
3. Rotate brush roll into place and line up
end caps.
4. Re-attach bottom cover with 10 screws.
3
1. Inspect brush roll by
placing it on its end and
spin. The brush roll should
spin freely, multiple times
by one flick. If it doesn't,
replace brush roll.
2. Inspect belt, replace if it
appears damaged.
www.BISSELL.com
15