Publicidad
Removing
the Mower Deck
WARNING
Engage the parking brake, disengage PTO, stop
engine, and remove key before attempting to remove
or install the mower deck.
1,
2,
3,
4.
5,
6,
7,
,
Park the tractor on a hard, level surface such as a
concrete floor. Turn off PTO switch and engine,
remove the key, and apply the parking brake.
Place the mower in the lowest cutting position using the
cutting height adjustment
switch (see Features
and
Controls).
Disconnect
the cutting height wire harness.
Place the attachment
lift in the down position.
Remove the cotter pin (A, Figure 18) and lift chain (B)
from the hook in tractor frame. Repeat for the other side.
Remove the cotter pin and washer at the inner lift bracket
(C, Figure 19) and disconnect
the inner J-bolt from the
bracket. Repeat for other side.
Pull the idler pulley lever (D, Figure 20) to release belt
tension. Remove belt (E) from PTO pulley (F).
Turn the wheels straight ahead. Pull back on spring-
loaded lever and lift mower hitch off of the tractor hitch
brackets (see Figure 21 ).
Turn the wheels fully left, and slide mower deck out from
under the right of the tractor.
Figure 19
Figure 18
Figure 20
23
Publicidad
