Publicidad
Lubricate
Mower Deck
Lubricate the mower deck at the locations shown in Figure
23.
m
Blade
Belt Replacement
1. Park the tractor on a smooth, level surface such as a
concrete floor. Disengage the PTO, turn off the engine,
and lock the parking brake. Remove the key.
2. Remove mower deck (see Removing
the Mower
Deck).
3. Remove screws and covers (A, Figure 24) for left and
right blade spindle.
4. Remove the PTO belt (see PTO Belt Replacement).
5. Remove the blade belt (E, Figure 25) from left and right
blade spindle (F and G).
6. Remove the old belt and replace with a new one. Make
sure the V-side of the belt runs in the pulley grooves.
7. Reinstall PTO belt.
8. Install mower deck (see Installing
the Mower
Deck).
Figure 23
Replacing
the Mower Belts
WARNING
To avoid
damaging
belts, do not pry belts over
pulleys.
PTO Belt Replacement
1. Park the tractor on a smooth, level surface such as a
concrete driveway. Disengage the PTO, turn off the
engine, and lock the parking brake. Remove the key.
2. Remove mower deck (see Removing
the Mower
Deck).
3. Remove screws and cover (A, Figure 24) for left blade
spindle.
4. Pull the idler pulley lever (B) to relieve belt tension.
Remove the belt (C) from the PTO pulley (D).
5. Remove the old belt and replace with a new one. Pull
the idler pulley lever to install the belt on the idler pulley.
Make sure the V-side of the belt runs in the pulley
grooves.
Figure 24
Figure 25
25
Publicidad
