Inglesina APTICA Instrucciones De Uso página 29

THE BASSINET IS AN OPTIONAL COMPONENT AND IS SOLD SEPARATELY
ATTACHING THE BASSINET TO THE CHASSIS
Take the bassinet from the handle and attach it to the chassis in correspondence
of the housings on both sides of the structure and place it solely in rear facing position.
Once the bassinet is installed, check that the indicators (G1) on both the
attachment devices are Green. If they are Red, reposition the bassinet correctly until both
parts are clearly heard to click into place.
before use.
DETACHING THE BASSINET FROM THE CHASSIS
Operate the lever (G2) located outside the bassinet and simultaneously lift it,
gripping it by the handle.
FITTING THE HOOD LINING
Wrap the hood lining (H
(H1
bassinet.
HANDLE AND HOOD ADJUSTMENT
To adjust both the handle and the bassinet hood, press the two internal buttons
simultaneously (H4).
ATTACHING THE APRON
slot buttons (I2).
protects your child from the cold.
detaching only the two side press studs (I1
the two slot buttons (I2).
BASSINET VENTILATION
The Aptica bassinet (G) features a coordinated ventilation system.
The ventilation of the base can be adjusted using the lever (G4) at the front.
If present:
The two mesh inserts on the back and on the hood (
the bassinet.
MATTRESS AND INTERNAL LINING MAINTENANCE
It is advisable to remove the mattress and internal lining periodically for correct maintenance.
To remove the internal lining (
BASSINET LINING MAINTENANCE
loops (
devices.
attachment of the bassinet to the chassis.
APTICA BASSINET
I
I3
to facilitate access to the child, the apron can be partially folded,
) simply release it from the edge of the bassinet.
H2).
I1) and then the two
) permit greater circulation of air inside
) on both the attachment
H3) to the
29