Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
_s_
¸_
_ss_,_/s_<_, _,_
-
• _
_
_
..........
,
•
_
_
, .....
_
•
In Setup
menu,
QUICK
mode,
CUSTOM
mode
and INITIALIZE
mode
are available
(refer to pages
25-28)•
QUICK
mode
consists
of the setting
menus
frequently
used,
and they are accompanied
with
_
mark•
You can make aJI settings
in CUSTOM
mode•
Language
Setting
Language options are not available with some discs_
U
Press the SETUP
button
in stop mode.
_'_ Press the Cursor
buttons
(-_ or _)
to select
CUSTOM,
then press
the ENTER
button•
• The custom mode will appear•
U
Press the Cursor
buttons
(_
or
_)
to seiect
LANGUAGE,
then
press the ENTER
button
to con-
firm•
L_ Press the Cursor
buttons
(A or
T) to select
an item, then
press
the ENTER
button•
D_ALOG
(Defaumt : ORIGINAL)
, Sets the audio language.
SUBTITLE
(DefauBt
: OFF)
• Sets the subtitle language•
D_SC MENU
(Defaumt : ENGLISH)
• Sets the language for DVD Menu•
OSD (Default:
ENGUSN)
_
K
, Sets the language for the On-Screen display•
[]
Press the Cursor
buttons
(,& or '_) to select
a set-
ting, then press
the ENTER
button•
• If OTHER is selected in the DIALOG, SUBTITLE or
DISC MENU, press four-digit number to enter the code
for the desired language (refer to the language code list
on page 29).
, Only the languages supported by the disc can be selected.
[]
Press the SETUP
button
to exit and activate
the
new settings•
NOTE:
, Language Setting for DIALOG and SUBTITLE may not
be available with some discs• Then use the AUDmO and
SUBTITLE
buttons. Details are on page 23.
Display Setting
You can change certain aspects of the DVD display screens,
still mode setting, Progressive and HDMI settings.
[]
Press the SETUP
button
in stop mode.
[]
Press the Cursor
buttons
(_
or _)
to select
CUSTOM,
then press
the
ENTER
button•
, The custom mode will appear.
[]
Press the Cursor
buttons (-,q or
P,-) to select DISPLAY, then press
the ENTER button to confirm•
L_ Press the Cursor
buttons
(A or
T) to select
an item, then
press the ENTER
button•
TvASPECT (De umt : LETTER OX)QUjK
• Press the Cursor buttons (A or
_) for an item selection, then
_d,_i_;"
_
press the ENTER button.
, Select
4:3 LETTER
BOX for a
black bars appears on top and bot-
tom of the screen.
, Select 4:3 PAN & SCAN for a full
height picture with both sides trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
• Select 4:3 SQUEEZE when the TV screen is too large hor-
izontally at 16:9 WIDE setting and when it is impossible to
adjust the screen size using the TV's controls.
STILL
MODE
(Default
: AUTO)
, Press the Cursor
buttons (_ or
_;,_
s,_':_
for an item selection (AUTO,
F ELD, or FRAME), then press
the ENTER button.
• This function allows you to
adjust picture resolution and
quality in still mode.
, An individual picture on TV screen is called as "frame',
which consists of two separate images called as "field".
Some pictures may be blurred at the AUTO setting in
still mode due to their data characteristics.
• AUTO: Automatically
selects the best resolution setting
(FRAME or FIELD) based on the data characteristics
of
the pictures.
• FIELD: Select FIELD when the pictures are still unsta-
ble even if AUTO is selected. FIELD stabilizes the pic-
tures, although the picture quality may become coarse
due to the limited amount of data.
, FRAME: Select FRAME to display relatively motionless
pictures in higher resolution. FRAME improves the pic-
ture quality, although it may unstabilize the pictures due
to simultaneous
output of two field data.
PROGRESSIVE
om
° Press the Cursor
buttons (A or
_) to set PROGRESSIVE
to ON
or OFF, then press the ENTER
button.
, The setting will be effective
when you exit the setup screen by pressing SETUP.
, When PROGRESSIVE
is ON, RSCAN appears on the
DVD player's display after you exit the setup screen.
• Refer to page 11 for more details.
• In the HDMI output mode, even when PROGRESSIVE
is set to ON, signals are output always as Interlace.
PROG.MODE
(Default:
AUTO1)
, Press the Cursor
buttons (_. or
4_di_
_"_ _
_) to select a mode for the pro-
gressive scan output, then press
the ENTER button.
, AUTO1 : mode suitable for
images on the film
material.
, AUTO2: mode for images on the material of 30-frame
film.
• VIDEO1 : mode for normal video material.
• VIDEO2: mode for video material with less movements.
, VIDEO3: mode for video material with many movements.
ND_
SELECT
(Default:
YObCr)
• Select an HDMI output mode
_,_*i;
_;_
between YCbCr and RGB•
, When the connected equipment
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
NDMI
PICTURE
(Default:
NORMAL)
• Select a HDMI picture mode
between NORMAL and
_
_;:;"'_
ENHANCED.
• Select ENHANCED
if the black-
white contrast is not clear.
, This setting is effective only for
HDMI RGB output.
[]
Press the SETUP
button to exit and activate
the new
settings•
- 25 -
EN
Publicidad
Tabla de contenido
