Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6. Whencleaning, repairingorinspectingthesnowthrower,
stoptheengine andmakecertain thecollector/impel-
ler andall moving parts havestopped.Disconnect
thesparkplugwireandkeepthewireaway fromthe
plug. toprevent someone f romaccidentally starting the
engine.
7. Donot runthe engine indoors, e xcept w henstarting
theengine andfortransporting thesnowthrower i nor
outof thebuilding. O pentheoutside doors; e xhaust
fumes aredangerous.
8. Exercise e xtreme caution whenoperating o nslopes.
9. Never o peratethe s now thrower without p roper g uards,
andothersafety protective d evices inplace andwork-
ing.
10.Neverdirectthe discharge towardpeopleor areas
where property d amage canoccur.Keep children and
othersaway.
11. Donotoverload the machine capacity byattempting
toclearsnowattoofasta rate.
12.Neveroperate themachine at hightransport speeds
onslippery surfaces. Lookbehind andusecarewhen
operating inreverse.
13. Disengage p ower t othecollector/impeller
when snow
thrower i s transported o r notin use.
14.Useonlyattachments andaccessories approved by
themanufacturer ofthesnowthrower ( suchaswheel
weights, counterweights, or cabs).
15.Never o perate t hesnow thrower w ithout g ood visibility
orlight. A lways besureofyourfooting, a ndkeepafirm
holdonthehandles. Walk;never r un.
16.Never t oucha hotengine ormuffler.
Clearing
a Clogged
Discharge
Chute
Hand contact with the rotating impeller inside the discharge
chute is the most common cause of injury associated with
snow throwers. Never use your hand to clean out the dis-
charge chute. To clear the chute:
1.
SHUT THE ENGINE OFF!
2.
Wait 10 seconds to be sure the impeller blades have
stopped rotating.
3.
Always use a clean-out tool, not your hands.
Maintenance
and Storage
1.
Check shear bolts and other bolts at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
2.
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present
such as hot water heaters, space heaters, or clothes
dryers. Allow the engine to cool before storing in any
enclosure.
3.
Always refer to operator's manual for important details
if the snow thrower is to be stored for an extended
period.
4.
Maintain or replace safety and instruction labels, as
necessary.
5.
Run the machine a few minutes after throwing snow
to prevent freeze-up of the collector/impeller.
TA L
OF CONTENTS
SAFETY RULES ........................................................
2-3
PRODUCT SPECIFICATIONS ......................................
4
................................
4
WARRANTY ..................................................................
4
............................... 6-8
OPERATION ............................................................
9=14
MAINTENANCE .....................................................
15=16
SCHEDULE .....................................
15
........................... 17-19
STO RAG E .............................................
19
................................................
20
REPAIR PARTS .....................................................
40-65
SEARS SERVICE ...................................
BACK COVER
Publicidad
Tabla de contenido
