Health And Safety Precautions; Electrical Precautions - Enofrigo DOGE Serie Manual De Instrucciones

• Static (or ventilated VT RF) condensing sealed type unit with thermoregulator for automatic temperature
control.
• Condensation collection drainer and pull-out tray located at end of machine for condensation water and
evaporation drainage
• water drain system;
• wheels on base of unit, "DROP-IN" models excluded;
• control panel.
DROP-IN = a model that fits flush into a pre-existing unit to become part of the furnishing.
8. HEALTH AND SAFETY PRECAUTION
The manufacturer has designed and built the machine taking account of the results of a preventive accurate
SAFETY and HEALTH risk analysis.
The protections and devices fitted on the machine therefore comply with the safety levels established by the
specific EEC directives.
Information on and illustrations of said protections and devices to enable the machine user to operate in
conditions of maximum possible safety are provided below.
a)
Mechanical precautions
The machine is provided with protections designed to prevent accidental contact with the moving parts. In
particular:
• DROP-IN models excluded, the machine is provided with 4 castors, 2 of which feature a pedal brake. The
machine is stable and does not require any anchoring to the floor (danger of impact);
• The light bulbs are protected by a screen in order to prevent accidental contact (danger of burns).
b)

Electrical precautions

The precautions established by the 2006/95 CEE directive and the EN 60335 standard have been adopted to
protect against the danger of direct and indirect contacts and all the scheduled tests have been performed as
certified by the CE declaration of conformity (see attachment B). All the tests provided for by the current
technical regulations for implementation of the EEC directive concerning EMC (2004/108/CEE directive) have
also been performed.
In particular:
• The components are all guaranteed by the manufacturers (each one bears the guarantee marking).
• The equipment and all other electrical components are fitted inside closed compartments in order to prevent
any DIRECT contact with live parts. The electrical current danger signal is affixed to the electrical panel
protection:
22 CT68900001_
Rev.00 07/13