Scrapping The Machine - Weee Directive; Ordering Spare Parts - Enofrigo DOGE Serie Manual De Instrucciones

In the event of imminent danger, turn the main switch off, unplug the unit from the socket interlocked
with switch and call the manufacturer or authorised dealer to request the services of a qualified technician.
If current dispersion occurs in contact with metal parts of the machine, turn the main switch off, unplug the unit
from the socket interlocked with switch and call the manufacturer or authorised dealer to request the services of
an electrician.
18.SCRAPPING THE MACHINE
At the end of its life, the machine must be disposed of in compliance with current local regulations concerning
industrial and special waste. It must also be made unserviceable by cutting the electrical power supply cable,
after disconnecting it.
1The Safe Disposal of Waste from Electrical and Electronic Equipment
Do not dump pollutant material in the environment. Dispose of it in compliance with the
relevant laws.
Under the WEEE (Waste Electrical and Electronic Equipment) Directive 2002/96/EC, when scrapping
equipment the user must dispose of it at the specific authorised disposal centres, or reconsign it, still
installed, to the original seller on purchase of new equipment.
All equipment which must be disposed of in accordance with the WEEE Directive 2002/96/EC is
marked with a special symbol.
The improper disposal of Waste Electrical and Electronic Equipment is liable to punishment
under the relevant laws in the countries where the offence is committed.
Waste electrical and Electronic Equipment may contain hazardous substances with potential
harmful effects on the environment and human health. You are urged to dispose of them
properly.

19. ORDERING SPARE PARTS

Please contact our customer service department for an enlarged plan of the machine and the code of the part to
be replaced.
Always provide the following information when ordering:
Machine serial number (on the plate)
-
Part reference number and code
-
Quantity required
-
Year of manufacture of the machine
-
Most appropriate means of shipment
-
Customer's address
-
The technical information provided in this manual is intended as a guide. The manufacturer reserves the right
to make changes at any time without notice.
31
2(WEEE Directive 2002/96/ EC)
CT68900001_
Rev.00 07/13