Alarm Setting - LEXIBOOK Meteoclock SM2000 Manual Del Usuario

1. In normal mode (idle screen), press the MODE/SET key four times to go the clock
setting.
e 2. Press and hold the MODE/SET key until the hour's digits start flashing.
3. Use the
confirm and adjust the next setting.
4. The setting sequence is displayed in the following order:
hannel. Hours
selected)
Note:
• Time Zone: If you receive no radio-control signal, the time zone should be set to 0. The
time zone is used in countries which can receive the radio-control signal but are not
located in the GMT+1 zone (Madrid, Paris, Roma, Berlin time zone). For example, if your
home country is located in GMT+2 (like Finland, Greece, Turkey, Romania,...), you should
set the time zone to 1.
• The day of the week can be displayed in 6 different languages: English (EN), French (FRA),
Italian (ITA), Spanish (ESP), German (DEU) or Portuguese (POR).
• When the DST function is turned on, the
5. Press the MODE/SET key to confirm your selection and go to the alarm setting.
1. In normal mode (idle screen), press the MODE/SET key five times to go the alarm
setting.
2. Press and hold the MODE/SET key until the hour's digits start flashing.
3. Use the
adjust the minutes.
4. Use the
go to the next setting.
5. Use the
off), then press MODE/SET to confirm and go back to normal mode.
Note: When the alarm is switched on, the
normal mode.
SM2000IM0298_changed.indd 25
and keys to increase or reduce the values, then press MODE/SET to
Minutes Year
24hr/12hr display
DST function On/Off
and keys to adjust the hour, then press MODE/SET to confirm and
and keys to adjust the minutes, then press MODE/SET to confirm and
and keys to select "ON" (alarm switched on) or "Off" (alarm switched
Month Day Time Zone (only if DSF is
DM (Day/Month) or MD (Month/Day) display
Day-of-week language.
icon is displayed in normal mode.

ALARM SETTING

icon is displayed on the LCD screen in
25
4/8/08 16:47:31